| Availability: | |
|---|---|
| Quantity: | |
The T100 EC motor is an IEC 100 frame EC-type permanent magnet synchronous motor for variable-speed ventilation and fluid-handling equipment. Because the VFD remains outside the motor, integrators can choose their preferred drive brand, centralize drives in a control cabinet, and run several T100 EC motors from one drive. The motor side contains fewer electronic components, which suits demanding installation environments. Two input variants are available: single-phase 200-277 V for sites without three-phase power, and three-phase 360-460 V for higher output. The EC platform reaches IE5+ efficiency, with motor-only efficiencies of 90-96 percent according to IEC 60034-30-1.
Item | 230 V Single-Phase Variant | 400 V Three-Phase Variant |
|---|---|---|
Model | T100ECI10F18C2B34S1 | T100ECI12F30C2B34T1 |
Rated Torque | 10 N·m | 11.3 N·m |
Rated Power | 1.88 kW @ 1800 rpm | 3.79 kW @ 3200 rpm |
Speed Range | 600-1800 rpm | 600-3200 rpm |
Input Power | 200-277 V, 50/60 Hz, Single-phase | 360-460 V, 50/60 Hz, Three-phase |
Rated Current | 12.5 A @ 1800 rpm | 7.8 A @ 3200 rpm |
Peak System Total Efficiency | Approx. 90% (including VFD losses) | Approx. 89.5% (including VFD losses) |
Cooling Method | IC416 forced ventilation | IC416 forced ventilation |
Mounting | B34 flange | B34 flange |
Protection Rating | IP55 (upgradable to IP66) | IP55 (upgradable to IP66) |
Ambient Temperature | -25°C to +40°C | -25°C to +40°C |
The T100 EC motor uses an external VFD rather than an integrated drive. One central drive can supply multiple T100 EC motors, and integrators can standardize on a chosen drive brand and cabinet layout. Drive selection support is available through our pre-sales technical team.
The EC platform on which the T100 EC motor is built reaches IE5+ efficiency, with motor-only efficiencies of 90-96 percent. Measured peak system total efficiency, including VFD losses, is approximately 90 percent for the single-phase variant and 89.5 percent for the three-phase variant, at the operating points in the specifications table.
The EC platform supports two connection-based speed bands: star (Y) at 100-1800 rpm and delta at 300-3600 rpm across the series. Delivered variants operate within the envelopes in the table, 600-1800 rpm for the single-phase unit and 600-3200 rpm for the three-phase unit, covering both low-speed high-torque and higher-speed fan duties.
Mounting dimensions follow IEC 100 frame standards, and the 28 mm shaft uses a standard IEC keyway. An existing IEC 100 frame AC motor can be replaced without an adapter plate, provided an external VFD is installed.
Current T100 EC motor variants use B34 flange mounting. The wider series supports B3, B30, B14, B5, B34, B35, B14B and B5R, and the feet on foot-mounted variants are removable. Confirm the arrangement when ordering.
The 28 mm shaft extension has a standard IEC keyway. Two-dimensional and three-dimensional installation drawings are available on request for checking impeller clearance and flange fit.
The T100 EC motor uses IC416 forced ventilation and is not self-ventilated across its full speed range. Installers should verify airflow over the motor at the lowest operating speed.
The T100 EC motor is used in central air conditioning fans, livestock ventilation, cold storage fans, data center cooling, industrial fans, water pumps, dust removal equipment, and AC motor retrofits. The single-phase variant suits sites without three-phase power; the three-phase variant suits higher-power duties.
Voltage, speed, shaft diameter, mounting, control method, cable length and connectors can be customized, and OEM manufacturing is offered to industrial clients and enterprise customers. The EC platform extends up to 30 kW. For ambient temperatures outside -25°C to +40°C, a customized model is available, and bearing brands can be specified.
No. The T100 EC motor is an EC-type PMSM and must be paired with an external VFD. One drive can run multiple T100 EC motors; contact our technical team for drive sizing.
The single-phase variant runs on 200-277 V and delivers 1.88 kW at 1800 rpm, while the three-phase variant runs on 360-460 V and delivers 3.79 kW at 3200 rpm. Full values appear in the specifications table.
Yes. Its mounting dimensions and 28 mm keyed shaft follow IEC 100 frame standards, so no adapter plate is required. An external VFD and corresponding control wiring must be added.
The T100 EC motor carries CE and ETL certifications. The warranty is 12 months from receipt for domestic orders and 18 months from shipment for overseas orders.