| Availability: | |
|---|---|
| Quantity: | |
The T132 EC motor is the largest frame in the T Series EC line and is designed for high-torque, low-speed operation. Two variants are offered: an 1800 rpm unit rated at 17.4 N·m and a 750 rpm unit rated at 48 N·m. The 48 N·m variant drives large-diameter fans directly, removing the gearbox or belt drive of conventional arrangements and reducing wearing parts. As an EC motor, the T132 is driven by an external VFD, so integrators can centralize hardware and share one drive across several motors. The EC platform reaches IE5+ efficiency, with motor-only efficiencies of 90-96 percent according to IEC 60034-30-1.
Item | 1800 rpm Variant | 750 rpm High-Torque Variant |
|---|---|---|
Model | T132ECI17F18C2B35RT1 | T132ECI48X07 |
Rated Torque | 17.4 N·m | 48 N·m |
Rated Power | 3.28 kW @ 1800 rpm | 3.7 kW @ 750 rpm |
Speed | Up to 1800 rpm | Up to 750 rpm |
Input Power | 360-460 V, 50/60 Hz, Three-phase | 360-460 V, 50/60 Hz, Three-phase |
Rated Current | 5.9 A @ 1800 rpm | [TBC]; refer to the datasheet |
Peak System Total Efficiency | Approx. 90.9% (including VFD losses) | Approx. 89.3% (including VFD losses) |
Cooling Method | IC416 forced ventilation | IC418, minimum air speed 1.5 m/s |
Mounting | B34 (per drawing; model code includes B35R, to be confirmed) | B3 standard; B5 / B14 optional; removable feet |
Protection Rating | IP55 (upgradable to IP66) | IP55 (upgradable to IP66) |
Ambient Temperature | -25°C to +40°C | -25°C to +40°C |
The 750 rpm T132 EC motor variant delivers 48 N·m and couples directly to a large-diameter fan impeller without a gearbox or belt transmission, removing those maintenance points and mechanical losses.
The EC platform reaches IE5+ efficiency, with motor-only efficiencies of 90-96 percent. The 1800 rpm variant has a measured peak system total efficiency of approximately 90.9 percent, including VFD losses, while the 750 rpm variant measures approximately 89.3 percent at the operating points in the table.
With the VFD external, several T132 EC motors can run from centralized drive hardware, supporting group control of livestock house or cold storage fans. Integrators select their preferred drive brand; our team supports selection.
The T132 EC motor is rated for S1 continuous duty and carries CE and ETL certifications. The brushless PMSM design has no commutator or brushes, reducing scheduled maintenance in comparable applications.
The 1800 rpm variant uses B34 flange mounting per the installation drawing; its ordering code includes the B35R designation, which should be confirmed at order. The 750 rpm variant uses B3 foot mounting, with B5 and B14 flange options and removable feet; the series supports the full set of IEC arrangements.
The 38 mm shaft extension has a standard IEC keyway, and mounting dimensions follow IEC 132 frame standards. An IEC 132 frame AC motor can be replaced without an adapter plate, subject to installation of an external VFD. Two-dimensional and three-dimensional drawings are available on request.
The 1800 rpm variant uses IC416 forced ventilation. The 750 rpm variant uses IC418 cooling and requires a minimum air speed of 1.5 m/s over the motor surface. Installers should verify airflow at the lowest operating speed.
The T132 EC motor is applied in large livestock ventilation fans, cold storage fans, data center cooling, industrial fans, dust removal equipment, water pumps, and AC motor retrofits. The 750 rpm variant suits large-diameter, low-speed direct-drive fans; the 1800 rpm variant suits standard-speed fan and pump duties.
Voltage, speed, shaft diameter, mounting, control method, cable length and connectors can be customized, and OEM manufacturing is provided to industrial clients and enterprise customers. The EC platform extends up to 30 kW. For ambient temperatures outside -25°C to +40°C, a customized model is available, and bearing brands can be specified.
No. The T132 EC motor requires an external VFD. A centralized drive can run multiple T132 EC motors, and our team supports drive selection.
The 750 rpm T132 EC motor is rated at 48 N·m and drives a large-diameter impeller directly, allowing removal of the gearbox or belt drive when torque and speed requirements match the specifications table.
The 1800 rpm variant is rated 17.4 N·m and 3.28 kW with IC416 cooling; the 750 rpm variant is rated 48 N·m and 3.7 kW with IC418 cooling requiring at least 1.5 m/s air speed.
The T132 EC motor carries CE and ETL certifications and is rated for S1 continuous duty. The warranty is 12 months from receipt for domestic orders and 18 months from shipment for overseas orders.