Views: 93 Author: Site Editor Publish Time: 2023-03-06 Origin: Site
The motorized roller is a small, hand-held device that is used to massage the muscles. It is often used by physical therapists and chiropractors to help relieve muscle pain and stiffness.
What are the characteristics of motorized roller?
What is the main structure of the motorized roller?
What are the precautions for using the motorized roller?
The motorized roller is a new type of driving device that puts the motor and the reducer inside the roller body. It is mainly used in fixed and mobile belt conveyors, replacing traditional motors, and the decelerator is a separate drive device outside the drive roller.
The motorized roller has many advantages such as compact structure, high transmission efficiency, low noise, long service life, stable operation, reliable operation, good sealing, small space occupation, convenient installation, etc., and is suitable for working in various harsh environmental conditions.
There is an axial through hole on the fixed shaft of the motorized roller, and the lead wire of the motor protrudes from this hole. In order to prevent the fixed shaft from rotating, a keyway is opened at the corresponding position of the shaft and the mounting support and a key is installed.
The current motorized roller generally adopts a cycloidal pin wheel deceleration mechanism, and the width plate of the outer cylinder doubles as a balance wheel of the deceleration mechanism, which further simplifies the entire motorized roller.
The motorized roller is an industrial motor, and it will inevitably suffer loss during use. However, by adjusting the usage method and paying more attention to details, the service life of the machine can be extended. The following are the precautions for the use of electric rollers:
For electric drums with rubber-coated simplification, the power of the motor should be increased by one gear.
The working environment temperature of the motorized roller is -10 degrees to 40 degrees, the temperature of the material is less than 600 degrees, and the altitude does not exceed 1000 meters. If the working environment exceeds the above range, please contact the manufacturer to solve the problem.
If the motorized roller works continuously for more than 8 hours a day, the power of the motor needs to be increased by one gear.
When starting a motorized roller frequently, the power of the motor should be increased by one gear.
The user should change the lubricating oil strictly according to the type of lubricating oil and the oil changing time specified in the instruction manual.
The motorized roller should be installed horizontally, with the maximum inclination angle not exceeding 5 degrees.
When restricting rotation in one direction, a motorized drum with a mechanical backstop should be selected.
If the motorized roller needs to be started under load, please contact the manufacturer.
When it is required to stop immediately when the power is cut off, the electric drum with electromagnetic brake should be selected.
Whatever your industry and the application of your equipment, we can recommend which rollers to use. Suzhou Motor and Drive Electromechanical Technology Co.,Ltd. take into account factors such as product size and weight, operating conditions and clean-down requirements.